Kernel hangs after "Now booting the kernel"

[Brian Rutledge]

Hi             I am using an Embedded Planet 852T board with a planet core bootloader. I am trying to boot the kernel (2.6) and the boot sequence gets as far as:   >go [Go 00200000]                                                                                        loaded at:     00200000 0030A160 relocated to:  00400000 0050A160 board data at: 00508124 00508140 relocated to:  004050B4 004050D0 zimage at:     004058FD 0050704A avail ram:     0050B000 01000000                                                                                         Linux/PPC load: console=ttyS0,9600 console=tty0 root=/dev/ram0 init=/linuxrc rw Uncompressing Linux...done. Now booting the kernel                 After which nothing happens.               Does the kernel try an set up the serial port at this point or can I assume that the serial is operational based on the output up to this point?               Are there any other areas I should be looking at?               Thanks Brian Legal Disclaimer: The information contained in this message may be privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete or destroy any copy of this message

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded