Hi Pradeep,
As soon as i apply the sysace driver and temac drivers and copy the
xparameters_ml300.h (from EDK) to xparameters_ml403.h all i get is this...
meaning kernel hangs after displaying "Now booting the kernel".
I have experienced this before. But in my condition, I applied both ACE and
Temac patches. Ameet said it's a problem of the kernel and the kernel just
lost the configuration information. So just "make proper" and reconfigure
your kernel and recompile it. In my condition, it helps. I don't know if it
is useful to solve your problem. Just try it.
When i disable sysace and TEMAC drivers, the system goes further till
"root=" option and then tries to "Kernel Rebooting in 180 seconds".
Yesterday i tried root=/dev/xsysace2 rw and creating block device files in
/dev of the CF card. But it ran into the same problem.Is there a sysace
driver patch that i can apply without applying the TEMAC driver patch?
Don't try root=/dev/xsysace2. In Ameet's driver, he defined as xsa2. So
just keep consistent with the source code.
Also, in his website, there are patches which are used without Temac. They
are not labeled with -after-temac.
So far i was using the EDK 8.1 SP2 (latest) which has the IP core TEMAC
version 3.00. Now i downgraded to EDK 8.1 to get the version 2.00 (please
see John Bonesio's post).
I am using TEMAC 1.00. The 3.00 version is totally different with 1.00. So
I don't know if it is one reason about your problem.
Regards
Ming
_________________________________________________________________
享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
