Dear Adrian, in message <[EMAIL PROTECTED]> you wrote: > > I have a PPChameleonEVB board running a 405EP processor.
DAVE has a lot of pretty detailed application notes. Make sure to read their docs. > I have tried many things, and can now boot Linux 2.6.15 on the board using > an NFS share as both root fs and swap. Swap over NFS? Grrghh... > When I try to compile & install the kernel modules on the board, i get an > message about perl and then it errors. Why don't you just use the cross tools? > 1) Kernel version/Linux distroof the i386 PC used for the cross-compiling. Should not matter much. > 2) ELDK version and if there are any patches needed. For a 2.6 kernel tree you need ELDK 4.0. > 2) Perl version (or how to stop the Kernel build using perl) Use the cross tools. It's much faster anyway. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] He had quite a powerful intellect, but it was as powerful like a locomotive, and ran on rails and was therefore almost impossible to steer. - Terry Pratchett, _Lords and Ladies_ _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
