The SMC and SCC hardware transmitter is enabled at the wrong
place. Simply writing twice to the non-console port, like
$ echo asdf > /dev/ttyCPM1
$ echo asdf > /dev/ttyCPM1
puts the shell into endless uninterruptible sleep, since the
transmitter is stopped after the first write, and is not enabled
before the shutdown function of the second write. Thus the transmit
buffers are never emptied.
Signed-off-by: Kalle Pokki <[EMAIL PROTECTED]>
---
drivers/serial/cpm_uart/cpm_uart_core.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c
b/drivers/serial/cpm_uart/cpm_uart_core.c
index 90ff96e..8f3b3e5 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -194,10 +194,8 @@ static void cpm_uart_start_tx(struct uar
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
smcp->smc_smcm |= SMCM_TX;
- smcp->smc_smcmr |= SMCMR_TEN;
} else {
sccp->scc_sccm |= UART_SCCM_TX;
- pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT;
}
}
}
@@ -420,9 +418,10 @@ static int cpm_uart_startup(struct uart_
/* Startup rx-int */
if (IS_SMC(pinfo)) {
pinfo->smcp->smc_smcm |= SMCM_RX;
- pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
} else {
pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
if (!(pinfo->flags & FLAG_CONSOLE))
--
1.4.1.1
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
