Hello, David, We have had the same problem,
after enabling pci in the kernelconfig, usb is working. best regards Achim > -----Ursprungliche Nachricht----- > Von: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > Auftrag von David Jander > Gesendet: Montag, 30. Oktober 2006 12:10 > An: linuxppc-embedded list > Betreff: Xubuntu and Xenomai on the Lite5200 (IceCube)... > > > > Hi all, > > I got the task to help make Linux run on the IceCube, with > support for MSCAN, > FEC and USB. After a rather exciting jurney I managed to get > kernel 2.6.18 > working with bestcomm DMA and FEC support backported from DENX's git > 2.6.19-rcsomething, and Xenomai installed upon that. > Btw, before Wolfgang Denk starts complaining why I didn't use > his 2.4 kernel, > it's because I wasn't smart enough to get USB working. If it > does work, > please tell me how, I just get errors when plugging in a USB > device "kernel: > usb.c: USB device not accepting new address=2 (error=-110)". > This seems to work fine in 2.6, though. > It was not easy, so I wrote everything down (I hope I didn't > forget anything > important): > > http://yopesblog.blogspot.com/2006/10/how-to-run-ubuntu-and-xe nomai-on.html If anyone wants to tell me what I did wrong (probably a lot), please tell me. I am posting this to the list hoping someone else will benefit from it. I certainly would have. Greetings, -- David Jander _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
