On Tue, 2006-10-31 at 21:04 +0100, Nicolas DET wrote:
> Here is is ;-).
> As my mailer can insert a file, I copy paste. I hope it's still ok...
No, your patch got wrapped. Its damaged. I see you used Thunderbird. I
have no experience with sending patches with it, so I don't know what
the trick is to have them undamaged. With evolution, the trick is to use
the pre-defined style "preformat".
Also, next, send it with proper form, that is just the commit message,
signed-off line, and patch. If you want to add personal comments on the
mail, add --- after the signed off and insert them between that and the
patch.
Anyway, minor comments, we're getting there...
> +void rtas_indicator_progress(char *, unsigned short);
That should be in a header.
> +extern unsigned long loops_per_jiffy;
That too. In fact, the default value for that which is all you need is
set in common code. Just drop that.
> +static void efika_show_cpuinfo(struct seq_file *m)
> +{
> + struct device_node *root;
> + const char *revision = NULL;
> + const char *codegendescription = NULL;
> + const char *codegenvendor = NULL;
> +
> + root = find_path_device("/");
Use of_find_device_by_path() and of_node_put() when done (see comments
in prom.h about old form of these being deprecated).
> + if (root) {
> + revision = get_property(root, "revision", NULL);
> + codegendescription =
> + get_property(root, "CODEGEN,description", NULL);
> + codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
> + }
> +
> + if (codegendescription)
> + seq_printf(m, "machine\t\t: %s\n", codegendescription);
> + else
> + seq_printf(m, "machine\t\t: Efika\n");
> +
> + if (revision)
> + seq_printf(m, "revision\t: %s\n", revision);
> +
> + if (codegenvendor)
> + seq_printf(m, "vendor\t\t: %s\n", codegenvendor);
> +}
> +
> +static void __init efika_setup_arch(void)
> +{
> + /* init to some ~sane value until calibrate_delay() runs */
> + loops_per_jiffy = 50000000 / HZ;
Above is already done in setup_32.c, just drop it.
> + rtas_initialize();
> +
> +#ifdef CONFIG_BLK_DEV_INITRD
> + initrd_below_start_ok = 1;
> +
> + if (initrd_start)
> + ROOT_DEV = Root_RAM0;
> + else
> +#endif
> + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
> +
> + pci_create_OF_bus_map();
I think the OF_bus_map() thing can safely be depracated. Don't bother
with it, you won't need it anyway.
> + efika_pcisetup();
> +
> + if (ppc_md.progress)
> + ppc_md.progress("Linux/PPC " UTS_RELEASE " runnung on Efika
> ;-)\n", 0x0);
> +}
> +
> +static void __init efika_init_IRQ(void)
> +{
> + of_irq_map_init(0);
The above is only useful if you have special flags to pass. You don't so
just skip it.
> + mpc52xx_init_irq();
> +}
> +
> +static void __init efika_init(void)
> +{
> + if (ppc_md.progress)
> + ppc_md.progress(" Have fun with your Efika! ", 0x7777);
> +}
> +
> +static int __init efika_probe(void)
> +{
> + char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
> + "model", NULL);
> +
> + if (model == NULL)
> + return 0;
> + if (strcmp(model, "EFIKA5K2"))
> + return 0;
> +
> + ISA_DMA_THRESHOLD = ~0L;
> + DMA_MODE_READ = 0x44;
> + DMA_MODE_WRITE = 0x48;
> +
> + /*
> + * Others values (isa_mem_base, pci_dram_base) are 0
> + * in CHRP for us. Only isa_io_base is changed.
> + */
> + isa_io_base = CHRP_ISA_IO_BASE;
Leave it to zero for now. pci_process_bridge_OF_ranges() will set it for
you to the right address. Pre-initializing is only useful if you have
very early IO ports access -and- have an early mapping on that range.
You have neither so don't bother.
> + return 1;
> +}
> +
> +define_machine(efika)
> +{
> + .name = EFIKA_PLATFORM_NAME,
> + .probe = efika_probe,
> + .setup_arch = efika_setup_arch,
> + .init = efika_init,
> + .show_cpuinfo = efika_show_cpuinfo,
> + .init_IRQ = efika_init_IRQ,
> + .get_irq = mpc52xx_get_irq,
> + .restart = rtas_restart,
> + .power_off = rtas_power_off,
> + .halt = rtas_halt,
> + .set_rtc_time = rtas_set_rtc_time,
> + .get_rtc_time = rtas_get_rtc_time,
> + .progress = rtas_progress,
> + .get_boot_time = rtas_get_boot_time,
> + .calibrate_decr = generic_calibrate_decr,
> + .phys_mem_access_prot = pci_phys_mem_access_prot,
> + .pcibios_fixup = efika_pciirq_map,
> +};
The later can go away if you apply the patch I posted last week
[PATCH] Powerpc: Make pci_read_irq_line the default: on mpc7448hpc2
board. First.
> --- a/arch/powerpc/platforms/efika/pci.c 1970-01-01 01:00:00.000000000
> +0100
> +++ b/arch/powerpc/platforms/efika/pci.c 2006-10-31 12:31:55.000000000
> +0100
> @@ -0,0 +1,150 @@
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/delay.h>
> +#include <linux/string.h>
> +#include <linux/init.h>
> +#include <linux/ide.h>
> +
> +#include <asm/io.h>
> +#include <asm/pgtable.h>
> +#include <asm/irq.h>
> +#include <asm/hydra.h>
> +#include <asm/prom.h>
> +#include <asm/gg2.h>
> +#include <asm/machdep.h>
> +#include <asm/sections.h>
> +#include <asm/pci-bridge.h>
> +#include <asm/grackle.h>
> +#include <asm/rtas.h>
You can trim a lot of the above #includes :)
> +#include "efika.h"
> +
> +static struct device_node *efika_pcictrl;
Not needed (the above).
> +/*
> + * Access functions for PCI config space using RTAS calls.
> + */
> +static int rtas_read_config(struct pci_bus *bus, unsigned int devfn,
> int offset,
> + int len, u32 * val)
> +{
> + struct pci_controller *hose = bus->sysdata;
> + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
> + | (((bus->number - hose->first_busno) & 0xff) << 16)
> + | (hose->index << 24);
> + int ret = -1;
> + int rval;
> +
> + rval = rtas_call(rtas_token("read-pci-config"), 2, 2, &ret, addr, len);
> + *val = ret;
> + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int rtas_write_config(struct pci_bus *bus, unsigned int devfn,
> + int offset, int len, u32 val)
> +{
> + struct pci_controller *hose = bus->sysdata;
> + unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
> + | (((bus->number - hose->first_busno) & 0xff) << 16)
> + | (hose->index << 24);
> + int rval;
> +
> + rval = rtas_call(rtas_token("write-pci-config"), 3, 1, NULL,
> + addr, len, val);
> + return rval ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
> +}
> +
> +static struct pci_ops rtas_pci_ops = {
> + rtas_read_config,
> + rtas_write_config
> +};
> +
> +void __init efika_pcisetup(void)
> +{
> + const int *bus_range;
> + int len;
> + struct pci_controller *hose;
> + struct device_node *root;
> + struct device_node *pcictrl;
> +
> + root = of_find_node_by_path("/");
> + if (root == NULL) {
> + printk(KERN_WARNING EFIKA_PLATFORM_NAME
> + ": Unable to find the root node\n");
> + return;
> + }
> +
> + for (pcictrl = NULL;;) {
> + pcictrl = of_get_next_child(root, pcictrl);
> + if ((pcictrl == NULL) || (strcmp(pcictrl->name, "pci") == 0))
> + break;
> + }
> +
> + if (pcictrl == NULL) {
> + printk(KERN_WARNING EFIKA_PLATFORM_NAME
> + ": Unable to find the PCI bridge node\n");
> + return;
> + }
of_node_put() when you are done with the result of
of_find_node_by_path() and of_get_next_child(). Note that the later does
it implicitely on its arguyment so you only need to do it if you exit
the loop early
> + efika_pcictrl = pcictrl;
Remove that.
> + bus_range = get_property(pcictrl, "bus-range", &len);
> + if (bus_range == NULL || len < 2 * sizeof(int)) {
> + printk(KERN_WARNING EFIKA_PLATFORM_NAME
> + ": Can't get bus-range for %s\n", pcictrl->full_name);
> + return;
> + }
> + if (bus_range[1] == bus_range[0])
> + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
> + bus_range[0]);
> + else
> + printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
> + bus_range[0], bus_range[1]);
> + printk(" controlled by %s", pcictrl->full_name);
> + printk("\n");
> +
> + hose = pcibios_alloc_controller();
> + if (!hose) {
> + printk(KERN_WARNING EFIKA_PLATFORM_NAME
> + ": Can't allocate PCI controller structure for %s\n",
> + pcictrl->full_name);
> + return;
> + }
> +
> + hose->arch_data = pcictrl;
> + hose->first_busno = bus_range[0];
> + hose->last_busno = bus_range[1];
> + hose->ops = &rtas_pci_ops;
> +
> + pci_process_bridge_OF_ranges(hose, pcictrl, 0);
> +}
> +
> +void __init efika_pciirq_map(void)
> +{
> + struct device_node *pcictrl = efika_pcictrl;
> + struct pci_dev *pdev = NULL;
> + struct device_node *ofwdev;
> +
> + if (pcictrl == NULL)
> + return;
> +
> + /*
> + * We need to find PCI irq, create a virtual mapping, and set
> + * the irq number into the PCI structure (software/Linux side)
> + * I could to this by walking into the /pci node, do
> + * of_irq_map_pci(), irq_create_of_mapping(), then find
> + * the good 'struct pci_dev *' and update pci_dev->irq.
> + * However, pci_read_irq_line() should do everything correctly!
> + */
> +
> + for_each_pci_dev(pdev)
> + {
> + if (pci_read_irq_line(pdev) < 0)
> + continue;
> +
> + ofwdev = pci_device_to_OF_node(pdev);
> + if (ofwdev)
> + printk(KERN_INFO EFIKA_PLATFORM_NAME ": got IRQ 0x%x
> for '%s'\n",
> pdev->irq, ofwdev->full_name);
> + }
> +
> +}
The whole function is not needed. Just apply my other patch first.
> --- a/arch/powerpc/platforms/efika/efika.h 1970-01-01 01:00:00.000000000
> +0100
> +++ b/arch/powerpc/platforms/efika/efika.h 2006-10-31 12:31:55.000000000
> +0100
> @@ -0,0 +1,20 @@
> +/*
> + * Efika 5K2 platform setup - Header file
> + *
> + * Copyright (C) 2006 bplan GmbH
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + *
> + */
> +
> +#ifndef __ARCH_POWERPC_EFIKA__
> +#define __ARCH_POWERPC_EFIKA__
> +
> +#define EFIKA_PLATFORM_NAME "Efika"
> +
> +void __init efika_pcisetup(void);
> +void __init efika_pciirq_map(void);
Use "extern" for prototypes in a .h
> +#endif
> --- a/arch/powerpc/platforms/efika/Makefile 1970-01-01
> 01:00:00.000000000 +0100
> +++ b/arch/powerpc/platforms/efika/Makefile 2006-10-31
> 20:03:05.000000000 +0100
> @@ -0,0 +1 @@
> +obj-y += setup.o pci.o
> --- a/arch/powerpc/platforms/Makefile 2006-10-31 20:28:06.000000000 +0100
> +++ b/arch/powerpc/platforms/Makefile 2006-10-31 12:31:55.000000000 +0100
> @@ -6,6 +6,7 @@ obj-$(CONFIG_PPC_PMAC) += powermac/
> endif
> endif
> obj-$(CONFIG_PPC_CHRP) += chrp/
> +obj-$(CONFIG_PPC_EFIKA) += efika/
> obj-$(CONFIG_4xx) += 4xx/
> obj-$(CONFIG_PPC_83xx) += 83xx/
> obj-$(CONFIG_PPC_85xx) += 85xx/
> --- a/arch/powerpc/boot/Makefile 2006-10-25 19:07:23.000000000 +0200
> +++ b/arch/powerpc/boot/Makefile 2006-10-31 12:31:55.000000000 +0100
> @@ -155,6 +155,7 @@ image-$(CONFIG_PPC_PSERIES) += zImage.p
> image-$(CONFIG_PPC_MAPLE) += zImage.pseries
> image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
> image-$(CONFIG_PPC_CHRP) += zImage.chrp
> +image-$(CONFIG_PPC_EFIKA) += zImage.chrp
> image-$(CONFIG_PPC_PMAC) += zImage.pmac
> image-$(CONFIG_DEFAULT_UIMAGE) += uImage
>
> --- a/arch/powerpc/Kconfig 2006-10-31 20:28:06.000000000 +0100
> +++ b/arch/powerpc/Kconfig 2006-10-31 19:57:57.000000000 +0100
> @@ -386,6 +386,19 @@ config PPC_CHRP
> select PPC_UDBG_16550
> default y
>
> +config PPC_MPC52xx_PIC
> + bool
> + default y
> +
> +config PPC_EFIKA
> + bool "bPlan Efika 5k2. MPC5200B based computer"
> + depends on PPC_MULTIPLATFORM && PPC32
> + select PPC_RTAS
> + select RTAS_PROC
> + select PPC_MPC52xx
> + select PPC_MPC52xx_PIC
> + default y
> +
> config PPC_PMAC
> bool "Apple PowerMac based machines"
> depends on PPC_MULTIPLATFORM
>
PIC patch separate please.
> +/*
> + * Critial interrupt irq_chip
> +*/
> +static void mpc52xx_crit_mask(unsigned int virq)
> +{
> + int irq;
> + int l2irq;
> +
> + irq = irq_map[virq].hwirq;
> + l2irq = (irq & MPC52xx_IRQ_L2_MASK) >> MPC52xx_IRQ_L2_OFFSET;
> +
> + pr_debug("%s: irq=%x, l2=%d\n", __func__, irq, l2irq);
> +
> + BUG_ON(l2irq != 0);
> +
> + io_be_clrbit(&intr->ctrl, 11);
> +}
I'm not sure you understood my previous comment... any reason why crit
and mainirq are two different sets of functions and a different level 1
since crit is just basically mainirq 0 ? And main & mainirq, on the
contrary, should be different L1s since they are ... different :)
> + switch (l1irq) {
> + case MPC52xx_IRQ_L1_CRIT:
> + pr_debug("%s: Critical. l2=%x\n", __func__, l2irq);
> +
> + BUG_ON(l2irq != 0);
> +
> + type = mpc52xx_irqx_gettype(l2irq);
> + good_irqchip = &mpc52xx_crit_irqchip;
> + break;
> +
> + case MPC52xx_IRQ_L1_MAIN:
> + pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq);
> +
> + if ((l2irq >= 0) && (l2irq <= 3)) {
> + type = mpc52xx_irqx_gettype(l2irq);
> + good_irqchip = &mpc52xx_mainirq_irqchip;
> + } else {
> + good_irqchip = &mpc52xx_main_irqchip;
> + }
> + break;
And doing so would have you simplify the above 2 cases
> + mpc52xx_irqhost =
> + irq_alloc_host(IRQ_HOST_MAP_LINEAR, 0xd0,
> + &mpc52xx_irqhost_ops, -1);
I would prefer that 0xd0 to be a symbolic constant in the .h
> + if (mpc52xx_irqhost)
> + mpc52xx_irqhost->host_data = (void *)find_mpc52xx_picnode();
Casting to void * is fairly useless :)
> +#ifdef CONFIG_PCI
> +#define _IO_BASE isa_io_base
> +#define _ISA_MEM_BASE isa_mem_base
> +#define PCI_DRAM_OFFSET pci_dram_offset
> +#else
> +#define _IO_BASE 0
> +#define _ISA_MEM_BASE 0
> +#define PCI_DRAM_OFFSET 0
> +#endif
I told you several times to remove the above. The whole thing is
duplicate of io.h.
The fact that the former has a special case for CONFIG_PPC_MPC52xx is
bogus in the first place... you might want to turn -that- into a
if defined(CONFIG_PPC_MPC52xx) && !defined(CONFIG_PPC_MERGE)
> +/*
> ======================================================================== */
> +/* Main registers/struct addresses
> */
> +/*
> ======================================================================== */
> +
> +/* MBAR position */
> +#define MPC52xx_MBAR 0xf0000000 /* Phys address */
> +#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */
> +#define MPC52xx_MBAR_SIZE 0x00010000
> +
> +#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x)))
> +#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT +
> (x)))
The above definitions are all bogus for arch/powerpc, just remove them.
> +/*
> + * 24 peripherals ints
> + * + 16 mains ints
> + * + 4 crit
> + * + 16 bestcomm task
> + * = 64
> +*/
> +#define MPC52xx_IRQ_MAXCOUNT (64)
The above is both not correct anymore and not used. Please fix it and
use it instead of hard coding.
> +static inline struct device_node *find_mpc52xx_picnode(void)
> +{
> + return of_find_compatible_node(NULL, "interrupt-controller",
> + "mpc5200-pic");
> +}
Any reason why you need that inline since it's not used anywhere else
but the PIC code ? Just put that of_find_compatible_node() statement in
the .c and be done with it.
> + /* Matching of PSC function */
> +struct mpc52xx_psc_func {
> + int id;
> + char *func;
> +};
>
> +extern int mpc52xx_match_psc_function(int psc_idx, const char *func);
> +extern struct mpc52xx_psc_func mpc52xx_psc_functions[];
> + /* This array is to be defined in platform file */
The above doesn't look like it should migrate to arch/powerpc... what is
it supposed to be ?
Ben.
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
