In message <[EMAIL PROTECTED]> you wrote: > > I have here a MPC5200 Lite (IceCube/Freescale Lite 5200) and tried to > get Xenomai running. > > If I use the 2.6 kernel from denx the board boots fine but I am not
Note that we explicitely do NOT support the MPC5200 in this tree yet. > able to patch the kernel with the adeos patch (adeos-patch is for > kernel 2.6.18) and the kernel from denx is 2.6.19rc4. I checked the > changes and they are to much for me to adapt it. Then just check out the 2.6.18 version of the tree. This is a git repo, so seeking to any version you like is a matter of seconds. > What I need now is a patch for kernel 2.6.18 to get all the MPC5200 > stuff running (priority has the networkchip) or a adeos patch for the > denx kernel 2.6.19-rc4. You do not want this, if you're on a MPC5200. I repeat, this is not supported. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] If I had to live my life again, I'd make the same mistakes, only sooner. -- Tallulah Bankhead _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
