Hello Wolfgang, * Wolfgang Grandegger <[EMAIL PROTECTED]> [06-11-06 12:21]: > unpack it and apply the relevant patches from the kernel-patches-target > diretory to linux-2.6-denx#v2.6.18. I think the following patches should > be sufficient (in that order): > > fec_mpc52xx_bestcomm.diff > fec_mpc52xx.diff > drivers_serial_mpc52xx_uart_fix.diff > mpc5200_physmap.diff
ok, my boards boots fine after that. > You can find the most recent Xenomai patch 2.6.18-ppc-1.05.00 at > "ftp://ftp.denx.de/xenomai";. I'm going to test them later today with > Xenomai. I applied now everything and Xenomai builds fine. I configured now my kernel, build it but the board do not boot or at least the console has gone. Which bootargs you use in u-boot to boot the Xenomai kernel? My bootargs are: bootargs=root=/dev/nfs rw nfsroot=192.168.0.151:/usr/local/eldk/ppc_6xx ip=192.168.0.101:192.168.0.151:192.168.0.151:255.255.255.0:icecube::off console=ttyPSC0 You can find what I did on: http://wiki.idefix.fechner.net/index.php/Xenomai Thx for tips. Best regards, Matthias -- "Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to produce bigger and better idiots. So far, the universe is winning." -- Rich Cook _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
