Dear Wolfgang,
Yes! It helps.
Thanks so much for your kindly help.
BR
Ming
From: Wolfgang Grandegger <[EMAIL PROTECTED]>
To: Ming Liu <[EMAIL PROTECTED]>
CC: [email protected]
Subject: Re: how to cross-compile netperf.
Date: Mon, 11 Dec 2006 12:24:45 +0100
Ming Liu wrote:
> Dear all,
> Maybe my question is not proper for this maillist but I really see some
> friends who are using netperf to measure the netowrk performance from
> this maillist. So I ask for help here.
> Could anyone please tell me how to cross-compile the Netperf which
could
> be run on my PowerPC 405 processor? I cannot find a detailed
explanation
> from the manual. After the downloading and untaring the package, I use
> the command "./configure --host ppc CC=powerpc-405-linux-gnu-gcc".
> However unfortunately it doesn't work and error " checking whether
> setpgrp takes no argument... configure:error: cannot check setpgrp when
> cross compiling" appears. My host system is X86_64 PC with linux OS and
> my target system is PowerPC 405(Xilinx Virtex 4 FPGA) with linux
> too(embedded Ml403 board from Xilinx company). In my condition, which
> arguments shall I specify?
> If anyone can help, I wll really appreciate a lot.
$ echo "ac_cv_func_setpgrp_void=yes" > config.cache
$ ./configure --host ppc CC=powerpc-405-linux-gnu-gcc --config-cache
Wolfgang.
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn/
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
