On 12/12/06, Pedro Luis D. L. <[EMAIL PROTECTED]> wrote: > Hi all, > > I´m working with a Lite5200B EVB, trying to atach an audio output to a PCM > 1680 from Texas Instruments. > At this moment I am using the patched 2.6.16.11-rt18 kernel that comes with > Freescale BSP. > I´ve tried to develop an I2S driver for the platform with no results. I´m > afraid that my driver devolping skills are still too low. > > Anybody knows a working I2S driver for this board that can throw any > audiooutput through PSCs?
I've just pushed a driver for the mpc52xx psc + AIC26 codec out to the 'lite5200' branch of my git tree on http://git.secretlab.ca. I've just pushed it out to my tree so that those who are interested can take a look at it. But it is *not* complete. Here's a non-exhaustive list of known issues with it. 1. not ported to arch/powerpc 2. doesn't use the SPI infrastructure 3. I had to rip out some board specific code for manipulating SPI chip selects (in order to release it) 4. Poor coding convention in places It works quite well on one of my targets; but I was not able to release that code as is; hence the broken driver. I'll be working on this code to get it into shape for inclusion into mainline. Most of the work will probably revolve around doing a proper SPI connection and adapting the bestcomm code to whatever Sylvain has brewing in his tree. The move to arch/powerpc will also have a fair impact. Cheers, g. -- Grant Likely, B.Sc. P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
