Hi Nirav,
First you can add the path to your brown new cross compiler in your PATH
(export PATH=$PATH:/opt/crosstool/...).
To add it permanently to your PATH just add this export line at the
end of your /home/YOURACCOUNT/.bashrc file, it will be take in account
on next open of a shell.
Then to compile the kernel you can do
make ARCH=ppc menuconfig
make ARCH=ppc CROSS_COMPILE=powerxxx- dep zImage
with powerxxx- the prefix of your cross compiler (in my case it
is powerpc-405-linux-gnu- dont forget the last of the prefix)
or
you can modify the Makefile in the roort directory of your kernel
source and change ARCH and CROSS_COMPILE and then just type
make menuconfig
make dep zImage
NOTE : Im not sure if ARCH is ppc or powerpc in your case.
Regards
Chris
-----Message d'origine-----
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
org] De la part de patel nirav
Envoyé : jeudi 18 janvier 2007 14:30
À : linux ppc
Objet : how to cross compile 2.4.18
Hello friends
I have installed crosstool-0.42 for the powerpc 604 in the
/opt/crosstool.
Now At the time of Installation I use gcc-3.4.1, glibc-2.3.3 and linux
kernel 2.4.18,
Now my question is how to use the crosstool to cross compile the linux
kernel 2.4.18 for power pc.
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
