On Fri, 19 Jan 2007 12:14:04 -0800 Russell McGuire wrote: > Ben, > > That could be the problem > > I am building using ARCH=ppc > > What is the difference between the two? Newer targets appear within arch/powerpc... Concerning your question, you seem to add new board hence you'll have to do those SERIAL_PORT_DFNS in board-specific header file - grep for them inside arch/ppc for reference (if that code is still there of course).
OTOH, if you are able to replace/update your firmware, I'd follow powerpc way. Difference is FAQ I guess, please look around this list. > > -----Original Message----- And, uhm, top quoting is not good. I know telling that fact to Lookout DIstress is a challenge but anyway :) -- Thanks, Vitaly > From: Ben Warren [mailto:[EMAIL PROTECTED] > Sent: Friday, January 19, 2007 11:58 AM > To: Russell McGuire > Cc: [email protected] > Subject: Re: MPC83xx: ns16550.c - 'SERIAL_PORT_DFNS' undeclared? > > > Russell, > > On Fri, 2007-01-19 at 11:28 -0800, Russell McGuire wrote: > > > > > arch/ppc/boot/common/ns16550.c error: 'SERIAL_PORT_DFNS' undeclared > > here .. > > > > I don't think you should be building any code there... Are you using > ARCH=powerpc (you should be) > > regards, > Ben > > > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
signature.asc
Description: PGP signature
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
