On 1/29/07, Joe <[EMAIL PROTECTED]> wrote: > Linux 2.6.19 shows arc/ppc/configs/ml[403|300]_defconfig, > but I see *zero* indication that the 410 is supported. Has anyone seen the > ML410 fully functional with Linux + a patch to enable the Ethernet ports? > (I also note that on the mvi$ta site they list support for: ML300 and ML40x > -- but NOT the ML410.) My searches also seem to indicate that the IP > included for the 410 Ethernet MAC's is distinctly different from the 403...
Correct, no patches to support 410 have been submitted to either the u-boot or linuxppc mailing lists as far as I know. You'll need to get the patches directly from Xilinx. I do know that they exist, but I have not worked with them at all as I don't have access to an ML410. > OTOH, if someone could confirm that this platform is NOT currently supported > that would be just as useful -- decisions can be made and actions taken. There are a number of Xilinx folks who hang out on this list, hopefully one of them will see your question and reply. Cheers, g. -- Grant Likely, B.Sc. P.Eng. Secret Lab Technologies Ltd. [EMAIL PROTECTED] (403) 399-0195 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
