On Sun, 04 Feb 2007 15:19:41 -0800 "Jack Ger" <[EMAIL PROTECTED]> wrote:
> Hi all, > > I am trying to run the customer LXT970 phy with MPC870, porting from > MPC885. I have the lxt phy driver installed and fs_enet driver installed > during > the kernel bootup. But during the the fs_enet_open, when trying to link > the specific phy, it fails to find the bus_id. Since we already know that > the FEC > is working in 2.4 kernel runing the 8xx_io fec, it must be something I have > done > wrong with the fs_enet, 2 questions: > It would be easier not to repeat myself to figure out the reason, and have a look at the patch. Mind posting it here? If that is a problem, send it to me and I'll try to get a few hins out... > 1) I understood that probably I didn't activate the bus, since I am porting > it > from MPC885fads_setup.c, there is something I missed. Currently I am using > montavista 4.0.1 which runing on kernel 2.6.10.; I noticed that the > mdiobus_register > never get called. > > 2) what is the right way to do the mdiobus_register to register the phy bus? > > TIA for your help. > > A Jones > > _________________________________________________________________ > Laugh, share and connect with Windows Live Messenger > http://clk.atdmt.com/MSN/go/msnnkwme0020000001msn/direct/01/?href=http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=hmtagline > > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded -- Sincerely, Vitaly _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
