On Wed, 14 Feb 2007, Laurent Pinchart wrote: > arch/ppc defines some 8260 generic handlers in syslib/mpc8260_setup.c for > operations such as halt, reset, show_cpuinfo, ... The MPC82xx ADS in > arch/powerpc/platforms/82xx redefines those handles as board-specific > functions. Should they be made generic to all 82xx boards, or should I copy > them to my board-specific file ? If the code should be shared by all 82xx > boards, I'll probably end up copying most of the > arch/ppc/syslib/mpc8260_setup.c code to > arch/powerpc/platforms/82xx/mpc82xx.c.
Emn, sorry, don't know about 8248 and 8260 specifically, but just looking at notation 8248 should be closer to 8245 than to 8260, is it not? If there are enough similarities, you might also look at arch/powerpc/platforms/embedded6xx/linkstation.c for an example of such a ppc -> powerpc migration. Not that I considered it an ideal example to follow. Rather, if it helps you - good. If you find anything that can be improved there - would be happy to know. Thanks Guennadi --- Guennadi Liakhovetski _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
