Download the MPC8541 reference manual from Freescale web site. Look in the chapter that says Exceptions (could be chapter 6) You'll fine the different vectors addresses + explanations about each vector.
Ami > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc- > [EMAIL PROTECTED] On Behalf Of Steve Iribarne > (GMail) > Sent: Tuesday, February 20, 2007 3:21 PM > To: linuxppc-embedded > Subject: 8541E and vector table. > > Hi. > > I must admit, this stuff always baffles me a bit, so I need someone > who knows this to explain it to me. > > I am using an 8541E and my system randomly crashes. By randomly, I > mean at different times. I have a BDI hooked up and it always jumps > to offset 0x0000_0700 > > I believe this to be a vector table offset, but I need to figure out > which interrupt it is. I believe this is a hardware issued, because > if I look at that value, it looks to be default values. In other > words, I don't believe I have it setup. > > So the question I have is how do I figure out what that interrupt vector > is? > > Thanks so much. > > -stv > > -- > /* > * Steve Iribarne > * Software Engineer > * (aka Grunt) > */ > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
