MTD partitions and partition commandline are enabled: > CONFIG_MTD_PARTITIONS=y > # CONFIG_MTD_REDBOOT_PARTS is not set > CONFIG_MTD_CMDLINE_PARTS=y [...] > > on evaluation (PQ2FADS-ZU) board.... > -------------------------------------------- > setenv ipaddr 192.168.178.234 > setenv serverip 192.168.178.110 > setenv ethaddr 00:99:23:44:ad:de > setenv bootcmd 'tftpboot 0x1000000 jffsenabled\;bootm 0x1000000\;' > setenv bootargs root=/dev/mtdblock0 rootfstype=jffs2 > ip=192.168.174.231:192.168.178.110:192.168.174.47:255.255.255.0:cashel:eth1 >:off
But where is your commandline that describes the partitions in your flash? Juergen _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
