well
Then, if what you say is correct, We should do almost all of the job by hand, ... this is very difficult and time cosuming.... What is the role of xmake tcl script in generated linux bsp? I renamed all of ML40x to ML403 in all of the files of the generated bsp, but still I encounter this error while compiling the kernel using xmake: arch/ppc/platforms/4xx/virtex.c:20: error: array type has incomplete element type arch/ppc/platforms/4xx/virtex.c:60: error: field name not in record or union initializer arch/ppc/platforms/4xx/virtex.c:60: error: (near initialization for 'core_ocp') make[1]: *** [arch/ppc/platforms/4xx/virtex.o] Error 1 make: *** [arch/ppc/platforms/4xx] Error 2 any body knows the reason for this error message? ---------------------------------------- > Date: Sat, 24 Feb 2007 13:38:11 +0100 > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > CC: [email protected] > Subject: Re: Compiling Linux Kernel for ML403 > > Hi Mohammad, > > The files that are in generated in the BSP are for an older mvista kernel > (based on 2.6.14 I think) and some things have changed since then. In > particular some tables in virtex.c and xilinx_ml403.c are different. It's > probably easier to fix these files manually than to copy the files from the > BSP. > > You should rename the xparameters_ml40x.h in the BSP to xparameters_ml403.h. > You may also need to add some #defines for constants that have changed names, > which you will discover when you try to compile the kernel. > > You need to manually edit Kconfig files to get menuconfig entries, and you > will need to edit some Makefiles to get it all to be compiled in. It could be > easier in mvista, I don't know... Good luck! > > Best regards, > Magnus > > On Sat, 24 Feb 2007 09:44:33 +0000 > Mohammad Sadegh Sadri wrote: > > > > > Hi all, > > > > Again , I have some questions: > > > > I downloaded the linux kernel from both of source.mvista.com ( 2.6.19 I > > think ) and kernel.org ( 2.6.20 ) , and I did the following tests on both > > of them: > > > > 1- Using EDK 8.2.02 , generated my base system for ml403. EDK generated BSP > > files. > > 2- I copied the linux-2.6.20.tar.bz2 into proper location in eldk directory > > and extracted there, Then I copied all of the BSP files into the root > > folder of my kernel source. > > 3- Editted the Makefile and set the ARCH and CROSS_COMPILE variables , also > > I set all of the env variables needed by edk. > > > > 4- ( First Question ) looking the BSP files generated by EDK I see that > > /arch/ppc/platforms/4xx/xparameters contains two files: xparameteres.h and > > xparameters_ml40x.h > > However when I look at the same folder in kernel source tree I see that the > > file name is different, it is xparameters_ml403.h > > Is this OK? I think that I should rename the file? > > > > 5- ( Second Question ) Although I have copied the BSP files into the my > > kernel source tree completely, nothing changes in the menuconfig. I mean > > the menuconfig ( menus and configs ) is the same as before, for example , > > no special option is added for gigabit ethernet support ( hard temac ) > > Is this ok? I expected to see some changes in menuconfig when I copied the > > files into kernel source. > > > > 6- ( Third Question ) Now, I do the needed primary configurations and then > > I type : make, to begin the build process. Obviously, It generates some > > error messages, Is this kind of behaviour natural? I was not expecting to > > see syntax errors in kernel source tree ? ( Of course, when I build the > > kernel without Xilinx BSP every thing is OK ) > > > > ( The above descriptions are true for both of mvista and kernel.org, ) > > > > thanks > > > > > > > > _________________________________________________________________ > > Explore the seven wonders of the world > > http://search.msn.com/results.aspx?q=7+wonders+world&mkt=en-US&form=QBRE > > _______________________________________________ > > Linuxppc-embedded mailing list > > [email protected] > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > -- > > Magnus Hjorth, M.Sc. > Omnisys Instruments AB > Gruvgatan 8 > SE-421 30 Västra Frölunda, SWEDEN > Phone: +46 31 734 34 09 > Fax: +46 31 734 34 29 > http://www.omnisys.se _________________________________________________________________ Connect to the next generation of MSN Messenger http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
