On Saturday 24 February 2007 09:38, Nethra wrote: [...] > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx > elevator: using anticipatory as default io scheduler > $Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $
Flash Translation Layer? JFFS2 does not need it (I believe). > physmap flash device: 800000 at ff800000 > RedBoot partition parsing not available > Using physmap partition definition > Creating 4 MTD partitions on "phys_mapped_flash": > 0x00000000-0x00600000 : "User FS" > mtd: Giving out device 0 to User FS > ftl_cs: FTL header not found. Disable the FTL when you try to use the content as JFFS2! > 0x00600000-0x00700000 : "uImage" > mtd: Giving out device 1 to uImage > ftl_cs: FTL header not found. > 0x00700000-0x00740000 : "bootloader" > mtd: Giving out device 2 to bootloader > ftl_cs: FTL header not found. > 0x00740000-0x00780000 : "bootloader env" > mtd: Giving out device 3 to bootloader env > ftl_cs: FTL header not found. Are these partitions correct? I cannot see where the definitions comes from. Juergen _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
