Hello, I have an MPC8349EMDS board with an 2.6.21-rc4 kernel and u-boot 1.2.0. I use the dts file from the kernel sources.
I've plugged a PCI board with a NEC 720101 (http://www.necel.com/usb/en/product/upd720101.html). This chip is a USB Host Controller with 1 EHCI if and 2 OHCI if. It looks like the kernel sees the USB if, but it fails to start it: ehci_hcd 0000:00:11.2: EHCI Host Controller ehci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:11.2: reset hcs_params 0xffffffff dbg=15 ind cc=15 pcc=15 ports=15 ehci_hcd 0000:00:11.2: reset portroute 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 ehci_hcd 0000:00:11.2: reset hcc_params ffffffff caching frame 256/512/1024 park 64 bit addr ehci_hcd 0000:00:11.2: park 0 ehci_hcd 0000:00:11.2: bogus port configuration: cc=15 x pcc=15 < ports=15 ehci_hcd 0000:00:11.2: MWI active ehci_hcd 0000:00:11.2: ...powerdown ports... ehci_hcd 0000:00:11.2: supports USB remote wakeup ehci_hcd 0000:00:11.2: irq 24, io mem 0xa0002000 ehci_hcd 0000:00:11.2: reset command ffffffff park=3 ithresh=63 LReset IAAD Async Periodic period=?? R ehci_hcd 0000:00:11.2: startup error -19 ehci_hcd 0000:00:11.2: USB bus 2 deregistered ehci_hcd 0000:00:11.2: init 0000:00:11.2 fail, -19 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:11.0: OHCI Host Controller ohci_hcd 0000:00:11.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:11.0: USB HC TakeOver from BIOS/SMM ohci_hcd 0000:00:11.0: USB HC takeover failed! (BIOS/SMM bug) ohci_hcd 0000:00:11.0: can't setup ohci_hcd 0000:00:11.0: USB bus 2 deregistered ohci_hcd 0000:00:11.0: init 0000:00:11.0 fail, -16 ohci_hcd: probe of 0000:00:11.0 failed with error -16 ohci_hcd 0000:00:11.1: OHCI Host Controller ohci_hcd 0000:00:11.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:11.1: USB HC TakeOver from BIOS/SMM ohci_hcd 0000:00:11.1: USB HC takeover failed! (BIOS/SMM bug) ohci_hcd 0000:00:11.1: can't setup ohci_hcd 0000:00:11.1: USB bus 2 deregistered ohci_hcd 0000:00:11.1: init 0000:00:11.1 fail, -16 ohci_hcd: probe of 0000:00:11.1 failed with error -16 Could someone help me to understand these messages? -- Greg _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
