On Mon, 19 Mar 2007 21:21:01 -0700 Thomas Maenner <[EMAIL PROTECTED]> wrote:
> Hi, > > I've downloaded ELDK4.1 and tried to compile the included kernel 2.6.19.2 > with: > make mrproper > make TQM860L_defconfig > make > (No other changes) > > At the end of the compile I get: > ---snip--- > UIMAGE arch/ppc/boot/images/uImage > Image Name: Linux-2.6.19.2 > Created: Mon Mar 19 15:50:14 2007 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 979098 Bytes = 956.15 kB = 0.93 MB > Load Address: 0x00000000 > Entry Point: 0x00000000 > Image: arch/ppc/boot/images/uImage is ready > AS arch/ppc/boot/simple/head.o > AS arch/ppc/boot/simple/relocate.o > CC arch/ppc/boot/simple/misc-embedded.o > CC arch/ppc/boot/simple/embed_config.o > arch/ppc/boot/simple/embed_config.c:31: warning: 'bdinfo' defined but not used > arch/ppc/boot/simple/embed_config.c:44: warning: 'def_enet_addr' defined but > not used > CC arch/ppc/boot/simple/m8xx_tty.o > arch/ppc/boot/simple/m8xx_tty.c:32: error: static declaration of 'cpmp' > follows non-static declaration > include/asm/commproc.h:74: error: previous declaration of 'cpmp' was here > make[2]: *** [arch/ppc/boot/simple/m8xx_tty.o] Error 1 > make[1]: *** [simple] Error 2 > make: *** [zImage] Error 2 > ------- > > Just in order to get it to compile, I took out static in > arch/ppc/boot/simple/m8xx_tty.c: > line 32: cpm8xx_t *cpmp = (cpm8xx_t *)&(((immap_t > *)IMAP_ADDR)->im_cpm); > > BTW, same thing happens if TQM823 config is used. > > I'm probably doing something wrong here... ;) > Well, after make foo_defconfig I usually do make uImage since with u-boot equipped boards full zImage is not required. -- Sincerely, Vitaly _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
