Gary Kenaley wrote: > I have been evaluating Freescale 2.6.11, Wind River 2.6.14, and am now > attempting Denx 2.6.19 (from ELDK 4.1) - running on the Rev 1.0 MPC8349E > MDS (V1.1 CPU). I boot 2.6.19.2 using the factory u-boot 1.1.3 and the > kernel immediately hangs:
Hey Gary, I'm working with the same board (and have a rev 3.0 EA board too). Here are my notes for the ELDK 4.0; http://www.ovro.caltech.edu/~dwh/powerpc_mpc8349e.pdf I setup the board so the software developers could start working with it, so haven't touched it for a while ... (the instructions use the arch/ppc version) ... So, try repeating via the arch/ppc method, and follow Ben's arch/powerpc advice and let us know how things went. If you're having trouble, then I hope to get back to working with the board soon, so I can also take a crack at repeating Ben's arch/powerpc method. Cheers, Dave _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
