Vitaly, Vitaly Bordug <[EMAIL PROTECTED]> wrote on 04/12/2007 08:36:58 AM:
> > It worked for me with both MontaVista and ELDK rfs for 6xx. > > Your problem looks very much like odd DDR or memctl misconfiguration > early in u-boot. > Ed made a similar observation. I've been assuming ;) that the DDR RAM was configured correctly since it's been a 'supported' eval board since at least u-boot 1.1.6, but there may be a problem there. At least I'm going to make sure that it's all okay before I continue. > Also, there is Vitesse switch on this target, which should be > initialized(Normally with vendor-shipped image you'll figure out how > by print thirdp_init. Starting kernel without that may result in > some instability too. Thanks. Again I was assuming all the HW was correctly configured with u-boot. I'll dig into this as well. Soon as I find anything for sure I'll post a follow up. Bruce ------------------------------------------------ This e-mail may contain SEL confidential information. The opinions expressed are not necessarily those of SEL. Any unauthorized disclosure, distribution or other use is prohibited. If you received this e-mail in error, please notify the sender, permanently delete it, and destroy any printout. Thank you. ------------------------------------------------ _______________________________________________ Linuxppc-embedded mailing list [EMAIL PROTECTED] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
