I tried combining the root file system and kernel images so that I could just load a single image in u-boot, and I disabled networking in the kernel config. When I do this, the kernel boots and loads into the shell no problem. The problem seems to be related to the Marvell PHY, so my plan is to investigate the IRQs and make sure it isn't getting the same as another device. Not sure what I'll look for after that, can KGDB step through the enet drivers on boot?
Clint -----Original Message----- From: Guennadi Liakhovetski [mailto:[EMAIL PROTECTED] Sent: Saturday, April 14, 2007 3:02 PM To: Clint Thomas Cc: Kumar Gala; [email protected] Subject: RE: Linux 2.6 and uboot On Fri, 13 Apr 2007, Clint Thomas wrote: > mice: PS/2 mouse device common for all mice i2c /dev entries driver > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > > This is the point where it stops booting. It might be just the point before root is mounted... That's what I'd check anyway... I see it has 2 eth interfaces. Can it be that their order has changed and it's trying the wrong one? Thanks Guennadi --- Guennadi Liakhovetski _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
