This will take you to a page where the download attachment link will actually work:
http://sourceforge.net/mailarchive/attachment.php?list_name=spi-devel-general&[EMAIL PROTECTED]&counter=1 On 5/2/07, Sascha Hauer <[EMAIL PROTECTED]> wrote: > Hi, > > On Wed, May 02, 2007 at 10:02:44AM +0200, Asier Llano Palacios wrote: > > > > > > > I'll have a look. If don't see anything the code from 2.4.x is good > > starting point to port it. > > There was a patch for the PSC in SPI mode for 2.6 posted here: > > http://sourceforge.net/mailarchive/forum.php?thread_name=45DD9ABF.9010009%40toptica.com&forum_name=spi-devel-general > > I can forward you the patch if you like, because the sourceforge server > only replies with "Insufficient parameters" when I click on the patch > link :( > > I myself wrote a driver for the dedicated SPI port which I can post on > spi-devel-general tomorrow (after I looked over it again). > > Best regards, > Sascha > > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
