Andrei Konovalov wrote: > Hello, > > My Xilinx Virtex Development tree is now alive again. > > Please use the dev branch (master is just the ko copy): > http://source.mvista.com/git/gitweb.cgi?p=linux-xilinx-26.git;a=shortlog;h=dev > Currently it has a patch to enable the framebuffer > on ML403 and ML300 plus TEMAC driver that uses > the PHY lib (FIFO mode support only). > The TEMAC driver is work in progress. > In the queue are SGDMA TEMAC support, and SPI driver > (master only). > > My concern is that the TEMAC driver uses the "level 1 drivers" from EDK 9.1. > The comments / opinions on how to get this driver (not the current incomplete > version of course) accepted into the ko tree are very welcomed. > I have an almost working FIFO TEMAC driver. It is similarly based. it started out based on the Trek webserver sample I spent probably 3-4 days de-EDKing it into something that fit into a single source and was closer to ko norms. It is based on approximately the EDK 8.1 stuff. You are welcome to it, if it could be helpful in anyway. I am all for getting an acceptable driver into the ko tree.
> I am not quite satisfied with how the current git repository > is structured, and may rework it completely later. > > Thanks, > Andrei > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > -- Dave Lynch DLA Systems Software Development: Embedded Linux 717.627.3770 [EMAIL PROTECTED] http://www.dlasys.net fax: 1.253.369.9244 Cell: 1.717.587.7774 Over 25 years' experience in platforms, languages, and technologies too numerous to list. "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." Albert Einstein _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
