Hi all!
There is a problem in cpm_setbrg (arch/powerpc/sysdev/cpm2_common.c
file) function. When rate 9600 all is OK, but with 115200 it doesn't
work properly. As I see it the following is incorrect:
*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
it must be
*bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;Best regards, Matvejchikov Ilya. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
