Hi guys I just bouht a ML403 board and started to study how can I get Linux 2.6 working in this board.... My questions are.....
1)The most prepared source tree is the http://source.mvista.com/git/gitweb.cgi?p=linux-xilinx-26.git;a=log there I will have the linux prepared to work with Video and network devices installed on my board? 2)I must use ELDK with this source to provide basic functionality to my Linux working on my board as gcc, gdb....? 3)Reading some previous posts... I saw some steps used to compile the Linux ... are they right? 3.1) Use EDK 8.2.02 to generate the base system for ml403. EDK generated BSP files. 3.2)Copy the linux-2.6.20.tar.bz2 into proper location in eldk directory and extracted there, Then copy all of the BSP files into the root folder of my kernel source. 3.3)Edit the Makefile and set the ARCH and CROSS_COMPILE variables , also I set all of the env variables needed by edk. 4) Ok now I got my kernel compiled in my Computer..... how do I transfer this kernel to my CF card on board?.... I must do some kind o bzimage....? Thanks Leonardo Araujo dos Santos [EMAIL PROTECTED] -- View this message in context: http://www.nabble.com/Steps-needed-to-get-Linux-2.6-Running-on-Xilinx-ML403-tf3918874.html#a11112197 Sent from the linuxppc-embedded mailing list archive at Nabble.com. _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
