> Message: 1 > Date: Fri, 8 Sep 2006 11:27:59 +0800 > From: "Li Yang-r58472" <LeoLi at freescale.com> > Subject: RE: MPC8360E USB Host Controller Driver > To: "Laurent Pinchart" <laurent.pinchart at tbox.biz>, > <linuxppc-embedded at ozlabs.org> > Cc: n.balaji at gdatech.co.in > Message-ID: > <4879B0C6C249214CBE7AB04453F84E4D14C864 at > zch01exm20.fsl.freescale.net> > Content-Type: text/plain; charset="US-ASCII" > > > Could you give a direct link ? I've been browsing around the > > Freescale website for an hour, downloaded hundreds of > > megabytes of archives but haven't been able to find the > > MPC8360E USB Linux driver. > > > > Laurent Pinchart
Hi Laurent, I believe that I recall seeing the USB drivers in the "MPC8360E Device Drivers - Release 1.1 GPL ", accessible from the main 8360 page. http://www.freescale.com/files/netcomm/software/device_drivers/MPC8360EGPLDRV.zip One little gotcha... When you unzip this archive, it's a windows executable, but it doesn't have the '.exe' extension on the file, so you'll need to add it by hand. I had to "contact my local FAE" just to figure out that one when the darn thing wouldn't run. Too many years of using Unix I guess. > > > > PS: Am I the only one to get lost almost every time when I > > look for information on www.freescale.com ? No, rest assured, you're not. Try finding any information about the eval board for the 8360 on freescale.com. -dan
