Hello. The following adds support for Freescale's PQ2FADS board to the
kernel.
(The 'real' changes required for the board are in the ethernet driver,
which needs a massive sync-up with mainline as I've been holding out for
a better, rewritten one from the Freescale folks, who're waiting for the
PHY lib patch sent to the net-dev list to get ack'd)
Signed-off-by: Tom Rini <trini at kernel.crashing.org>
--- 1.94/arch/ppc/Kconfig 2005-01-04 19:48:07 -07:00
+++ edited/arch/ppc/Kconfig 2005-01-12 16:17:17 -07:00
@@ -623,6 +623,12 @@
config ADS8272
bool "ADS8272"
+config PQ2FADS
+ bool "Freescale-PQ2FADS"
+ help
+ Select PQ2FADS if you wish to configure for a Freescale
+ PQ2FADS board (-VR or -ZU).
+
config LITE5200
bool "Freescale LITE5200 / (IceCube)"
select PPC_MPC52xx
@@ -655,7 +661,7 @@
config 8260
bool "CPM2 Support" if WILLOW
depends on 6xx
- default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx
+ default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx ||
PQ2FADS
help
The MPC8260 is a typical embedded CPU made by Motorola. Selecting
this option means that you wish to build a kernel for a machine with
--- 1.2/arch/ppc/platforms/pq2ads.h 2004-08-13 14:03:33 -07:00
+++ edited/arch/ppc/platforms/pq2ads.h 2005-01-12 16:20:03 -07:00
@@ -40,6 +40,8 @@
#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable
*/
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable
*/
+#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */
+#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
#define PHY_INTERRUPT SIU_INT_IRQ7
--- 1.10/include/asm-ppc/mpc8260.h 2004-08-23 11:08:39 -07:00
+++ edited/include/asm-ppc/mpc8260.h 2005-01-12 16:17:18 -07:00
@@ -36,7 +36,7 @@
#include <platforms/tqm8260.h>
#endif
-#ifdef CONFIG_PQ2ADS
+#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
#include <platforms/pq2ads.h>
#endif
--
Tom Rini
http://gate.crashing.org/~trini/
