Hi, we use the ELDK on G4 here in the following way: a) install ELDK on x86 b) move target directory (the one you would use for NFS) to your G4 c) chroot into that target directory on yout G4 d) manually mount /proc, setup path, ...
Compilation of u-boot and Linux Kernel works fine. (tested with 82xx and 8xx). Regards, Torsten > -----Original Message----- > From: linuxppc-embedded-bounces at ozlabs.org > [mailto:linuxppc-embedded-bounces at ozlabs.org]On Behalf Of annamaya > Sent: Freitag, 14. Januar 2005 16:52 > To: linuxppc-embedded at ozlabs.org > Subject: ELDK on a PowerPC host machine? > > > I noticed that ELDK from denx does not support running > on a PowerPC host machine like the Power G4 or G5. > When I tried rebuilding it on a Power G4 with > YellowDog installed on it, it complained that the > PowerPC host machine is not supported. Why is this > host architecture not supported? I also found out that > MontaVista does not support the PowerPC host > architecture anymore which they did a while ago. What > seems to be the real reason for not supporting this? > Thanks for the reply. > > > > > __________________________________ > Do you Yahoo!? > Yahoo! Mail - You care about security. So do we. > http://promotions.yahoo.com/new_mail > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded >
