It appears that I successfully programmed u-boot into flash. However, I get no menu at the ebony serial port when I reboot?? Any ideas why. Has anyone had this before on 440GP/Ebony platform.
Below is the sequence of erasing/programming and then displaying the point in memory(flash) where the board boots from. BDI>erase Erasing flash at 0xfff80000 Erasing flash at 0xfff90000 Erasing flash at 0xfffa0000 Erasing flash at 0xfffb0000 Erasing flash at 0xfffc0000 Erasing flash at 0xfffd0000 Erasing flash at 0xfffe0000 Erasing flash at 0xffff0000 Erasing flash passed BDI>prog 0xfff80000 u-boot.bin bin Programming u-boot.bin , please wait .... Programming flash passed BDI>md 0xfff80000 fff80000 : 27051956 552d426f 6f742030 2e322e30 '..VU-Boot 0.2.0 fff80010 : 20284a61 6e203331 20323030 33202d20 (Jan 31 2003 - fff80020 : 30353a31 323a3535 29000000 00000000 05:12:55)....... fff80030 : 00000000 00000000 00000000 00000000 ................ fff80040 : 00000000 00000000 00000000 00000000 ................ fff80050 : 00000000 00000000 00000000 00000000 ................ fff80060 : 00000000 00000000 00000000 00000000 ................ fff80070 : 00000000 00000000 00000000 00000000 ................ fff80080 : 00000000 00000000 00000000 00000000 ................ fff80090 : 00000000 00000000 00000000 00000000 ................ fff800a0 : 00000000 00000000 00000000 00000000 ................ fff800b0 : 00000000 00000000 00000000 00000000 ................ fff800c0 : 00000000 00000000 00000000 00000000 ................ fff800d0 : 00000000 00000000 00000000 00000000 ................ fff800e0 : 00000000 00000000 00000000 00000000 ................ fff800f0 : 00000000 00000000 00000000 00000000 ................ BDI> -- Brian ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
