In message <200302101644.53246.samble at xopnetworks.com> you wrote: > > I am using ELDK-2.0 to create a bootable kernel image for PPC8xx. I have > PPCBoot on my target and I want to download the kernel from the host to the > target using TFTP boot. I have verified that I can transfer the image via > TFTP boot. I am creating the initrd image using the following sequence of > commands.
There is basicly zero relevance to Linux so this is off topic on this list. You should ask this on the U-Boot-Users mailing list instead. > 1. make config > 2. make dep > 3. make clean OK so far. > 4. make zImage.initrd Wrong. Please see the README for instructions how to build a Linux image for use with U-Boot / PPCBoot. > 5. Compress the "zvmlinux.initrd" executable using "gzip" Twice wrong. > 6. Execute mkimage command to prepare it for "ppcboot" Completely bogus. > responds. Can one of you please point to where I may be going wrong? Please read the available documentation. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de No question is too silly to ask. Of course, some questions are too silly to to answer... - L. Wall & R. L. Schwartz, _Programming Perl_ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
