I recently installed u-boot on an ebony board. I will attach my bin for you. It is u-boot-0.2.0. It is built with a hack to auto-boot in 5 seconds. Make sure you hit return within five seconds to get to the u-boot prompt. I did this so I wouldn't have to enter the boot command by hand every time I booted.
It was built according to the howto instructions in the source README for EBONY_config, and it was compiled using the ELDK tool-chain. -- Brian p.s. I will send a second email just to you, so as not to send the attachment to the entire mailing list. p.p.s. I had to (a) set mac addrs at 0xfffffe00 and then (b) in nvram to get my kernel to successfully boot. These can both be done from the u-boot prompt. Details on this are providing in the Denx ELDK documentation. -----Original Message----- From: ed garcia [mailto:[EMAIL PROTECTED] Sent: Thursday, February 13, 2003 8:38 AM To: linuxppc-embedded at lists.linuxppc.org Subject: Looking for Ebony u-boot Hi, I just received and IBM Ebony 440GP system. I'd like to get it going using U-Boot. Can anyone point me to an "already built" binary I can program onto the board?? I will be doing the other route as soon as I can set up another Linux box with the proper environment to build the sources. I'm trying to do a couple of things in parallel ... Thanks for any help !!! Regards Ed Garcia ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
