hi! I'm porting mvista linux 2.1 for the motorola lopec mpc7410 board.And I noticed that there are some differences between the board version described by mvista and motorola.Also,the version of PPCBug is different.I'm wondering why? Does anyone have encounter the problem before?Here is my board starting information: /////////// Copyright Motorola Inc. 1988 - 2001, All Rights Reserved
PPC5 Debugger/Diagnostics Release Version 1.3 - 04/27/2001 RM01 COLD Start Local Memory Found =20000000 (&536870912) MPU Clock Speed =400Mhz BUS Clock Speed =100Mhz Reset Vector Location : ROM Bank B Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE L2Cache: 2048KB, 200Mhz System Memory: 512MB, ECC Enabled (ECC-Memory Detected) PPC5-Bug>CNFG Board (PWA) Serial Number = "6016204 " Board Identifier = "LoPEC-P011 " Artwork (PWA) Identifier = "01-W3646F11B " MPU Clock Speed = "400" BUS Clock Speed = "100" Ethernet Address = 0001AF0996C8 Primary SCSI Identifier = "07" System Serial Number = "0 " System Identifier = "0 " License Identifier = "6016204 " ////////////////// When I port the mvista linux v2.1(motorola lopec 74xx lsp),the starting information is showed below: ////////////// Copyright Motorola Inc. 1988 - 2001, All Rights Reserved PPC5 Debugger/Diagnostics Release Version 1.3 - 04/27/2001 RM01 COLD Start Local Memory Found =20000000 (&536870912) MPU Clock Speed =400Mhz BUS Clock Speed =100Mhz Reset Vector Location : ROM Bank B Mezzanine Configuration: Single-MPU Current 60X-Bus Master : MPU0 Idle MPU(s) : NONE L2Cache: 2048KB, 200Mhz Initializing System Memory (DRAM)... L2Cache: 2048KB, 200Mhz System Memory: 512MB, ECC Enabled (ECC-Memory Detected) SelfTest/Boots about to Begin... Press <BREAK> at anytime to Abort ALL NetBoot about to Begin... Press <ESC> to Bypass, <SPC> to Continue Network Booting from: I82559, Controller 0, Device 0 Device Name: /pci at fec00000/pci8086,1209 at e,0:0,0 Loading: vmlinuz-motorola-lopec Client IP Address = 192.168.201.3 Server IP Address = 192.168.201.1 Gateway IP Address = 0.0.0.0 Subnet IP Address Mask = 255.255.255.0 Boot File Name = vmlinuz-motorola-lopec Argument File Name = Network Boot File load in progress... To abort hit <BREAK> Bytes Received =&784800, Bytes Loaded =&784800 Bytes/Second =&392400, Elapsed Time =2 Second(s) Residual-Data Located at: $1FED16DC loaded at: 00005400 000C65BC relocated to: 00800000 008C11BC zimage at: 00805A00 008BD53E avail ram: 00400000 00800000 Linux/PPC load: ip=on Uncompressing Linux...done. Now booting the kernel /////////////////////////////////////////////////////////////////////////// After "Now booting the kernel",there is nothing put on the screen.I don't know why?Can anybody help me? ????????????????yuj at mail.ndsc.com.cn ????????????????????2002-11-14 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
