> > Sending this to the embedded list as well. > > Jocke > > On Wed, Nov 20, 2002 at 07:55:35PM +0100, Joakim Tjernlund wrote: > > > > > > > > > > > > > hmm, my i2c stuff got into rc2 (and uart too?). I see this on rc2 AND > > > > > rc1, but NOT in pre8. > > > > > No, I have not tried to port it to vanilla 2.4.x. It requires some > > > > > work to do that. > > > > > > > > They both made it in post rc1 I think, yes. Try going back carefully > > > > via bk changes and bk export -tr1.xxxxx (find when > > > > /home/.../linuxppc_2_4 was merged into /home/.../linuxppc_2_4_devel). > > > > > > The error ocurres between changeset 1.1130 - 1.1137. > > > I forgot to mention that the error only happens on a 862,100Mhz, 16KB > > > icache, 8KB dcache. > > > My 860,80Mz does not show the problem. > > > > > > Idea's ? > > > > Can you narrow down the ChangeSet it occured at a bit? > > Aaargh, now I am getting it in pre8 as well. However I have made > some progress: > > I have 2 custom boards one mpc862(100Mhz, 16KB icache, 8KB dcache) and a > mpc860(80Mz,4KB icache, 4KB dcache). If I overclock the mpc860 to 100MHz I get > the same problem. If I set the clock on both boards to 95MHz all is well. If > I overclock > the mpc862 to 105 MHz it works fine. > > It turns out that syslog is actually running after the error. If I stop > syslog and > start it again it works fine. If adjust my script so klogd is started before > syslogd all is well to. > > This looks like a race somewhere to me, but i have no clue as to where. > > Anyone? > > Jocke
hmm, if I upgrade the JFFS2 filesystem to CVS HEAD, the problem goes away. Jocke ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
