The start information is list below:
//////////////////////////////////
Copyright Motorola Inc. 1988 - 2001, All Rights Reserved

PPC5 Debugger/Diagnostics Release Version 1.3 - 04/27/2001 RM01
COLD Start

Local Memory Found =20000000 (&536870912)

MPU Clock Speed =400Mhz

BUS Clock Speed =100Mhz

Reset Vector Location  : ROM Bank B
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s)            : NONE

L2Cache:       2048KB, 200Mhz
Initializing System Memory (DRAM)...
L2Cache:       2048KB, 200Mhz
System Memory: 512MB, ECC Enabled (ECC-Memory Detected)


SelfTest/Boots about to Begin... Press <BREAK> at anytime to Abort ALL

NetBoot about to Begin... Press <ESC> to Bypass, <SPC> to Continue

Network Booting from: I82559, Controller 0, Device 0
Device Name: /pci at fec00000/pci8086,1209 at e,0:0,0
Loading: vmlinuz-motorola-lopec

Client IP Address      = 192.168.201.3
Server IP Address      = 192.168.201.1
Gateway IP Address     = 0.0.0.0
Subnet IP Address Mask = 255.255.255.0
Boot File Name         = vmlinuz-motorola-lopec
Argument File Name     =

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&784800, Bytes Loaded =&784800
Bytes/Second   =&392400, Elapsed Time =2 Second(s)

Residual-Data Located at: $1FED16DC
loaded at:     00005400 000C65BC
relocated to:  00800000 008C11BC
zimage at:     00805A00 008BD53E
avail ram:     00400000 00800000

Linux/PPC load: ip=on
Uncompressing Linux...done.
Now booting the kernel

/////////////////////////////
Have you solved your problem now?

>Sir, I am having a similar issue with an Intel network board on an MCP750 
>>board. How far does the kernel get, where does it stop?



>   I'm porting hardhat linux v2.1 on my motorola lopec mpc7410 board with a 
> zynx zx212 dual-port ethernet card on it.The problem is that the kernel can't 
> start up with the ethernet card on,while without it everything is 
> perfect.Since zx212 is compatible with 21143,I build the kernel with the 
> "tulip" option on.It should be no problem,but it happened.Can anybody tell me 
> the reason?
> ????????????????yuj at mail.ndsc.com.cn
> ????????????????????2002-11-14
>
>

????????????????yuj at mail.ndsc.com.cn
????????????????????2002-11-26

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/



Reply via email to