????Hi
I'am trying to Hard Hat linux 1.2 on custom MPC8240 Board
modifying Sandpointing8240 SDK.
I want to use ramdisk so I did " make zImage.initrd"
but there are errors. followings are error messages
=================================================================
.
.
mlinux: 59.5% -- replaced with vmlinux.gz
make[2]: Leaving directory
`/opt/hardhat/devkit/lsp/motorola-sandpoint/linux-2.4.2_hhl20/arch/ppc/boot/images'
make -C sandpoint zImage.initrd
make[2]: Entering directory
`/opt/hardhat/devkit/lsp/motorola-sandpoint/linux-2.4.2_hhl20/arch/ppc/boot/sandpoint'
ppc_82xx-ld -T
/opt/hardhat/devkit/lsp/motorola-sandpoint/linux-2.4.2_hhl20/arch/ppc/vmlinux.lds
-Ttext 0x00800000 -o zvmlinux.initrd.tmp head.o ../common/misc-common.o
../common/misc-simple.o ../common/ns16550.o ../common/string.o ../lib/zlib.a
ppc_82xx-objcopy -O elf32-powerpc -R .comment \
--add-section=initrd=../images/ramdisk.image.gz \
--add-section=image=../images/vmlinux.gz \
zvmlinux.initrd.tmp zvmlinux.initrd
ppc_82xx-objcopy: cannot stat: ../images/ramdisk.image.gz: no such file or
directory
make[2]: *** [zvmlinux.initrd] Error 1
make[2]: Leaving directory
`/opt/hardhat/devkit/lsp/motorola-sandpoint/linux-2.4.2_hhl20/arch/ppc/boot/sandpoint'
make[1]: *** [zImage.initrd] Error 2
make[1]: Leaving directory
`/opt/hardhat/devkit/lsp/motorola-sandpoint/linux-2.4.2_hhl20/arch/ppc/boot'
make: *** [zImage.initrd] Error 2
=================================================================
Question ]
At cimpile time, ramdisk.image.gz is needed .
1) How do I make ramdisk.image.gz ?
Thanks in advance.
DongSeak Yoon
Question ]
1) Do I have to make ramdisk.image.gz ?
2) if so , how can I make it ?
Thanks in advance.
DongSeak Yoon
E-mail : manulsan at daintelecom.com
Mobil : 016-208-9568
Fax : 82-2-581-2805
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
