Le sam, 01 sep 2001 01:29:04, Tom Rini a ?crit : > And if this fails, I just thought of one more thing (I need some hw I can > test this on locally...). > Look for: > bl flush_instruction_cache > And add #if 0/#endif around that and try again...
I have done a pull this morning and applied your patchs. I have the same results even after the bl flush_instruction_cache suppression. Here is the result : Network Boot File load in progress... To abort hit <BREAK> Bytes Received =&701661, Bytes Loaded =&701661 Bytes/Second =&701661, Elapsed Time =1 Second(s) Exception: Program (Illegal Instruction) SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700 IP =001F0000 MSR =00003040 CR =00000000 FPSCR =00000000 R0 =00000000 R1 =03F00000 R2 =00000000 R3 =00000000 R4 =00000000 R5 =49504C01 R6 =00007000 R7 =001F0000 R8 =03F0CF54 R9 =03F0CD54 R10 =03F0CD60 R11 =03F0CE54 R12 =03F0CE54 R13 =00000000 R14 =00000000 R15 =00000000 R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000 R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000 R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000 R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000 SPR0 =00000000 SPR1 =00000000 SPR8 =00000000 SPR9 =00000000 001F0000 00040000 WORD $00040000 The board don't have any disk or system for the moment, perhaps this is the problem ? I just want to try to boot now... Because I have also a mvme2303 with a whole debian system on it. So if I have a kernel for the mvme5100 I will only need to put my SCSI PMC to have a complete system. O+ xavier -- 33 (0) 1 69 15 79 59 De chacun selon ses forces, a chacun selon ses besoins ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
