'PowerBoot' is the firmware I am using. I preferred to use 2.2.14 because, it has PowerCore option, where I can use 750 with minimal changes.
I am not making any calls to firmware after that. This 'mtmsr' instruction is third instruction and it hangs with out finishing. What might be the problem that I have to fix to get this working. -- Siva > -----Original Message----- > From: Tom Rini [mailto:trini at kernel.crashing.org] > Sent: Wednesday, September 26, 2001 3:43 PM > To: Prasad, Siva > Cc: linuxppc-embedded at lists.linuxppc.org > Subject: Re: mtmsr... > > > On Wed, Sep 26, 2001 at 09:40:31AM -0700, Prasad, Siva wrote: > > > PowerPC 750 on a custom board. > > I tried both the bitkeeper source (2.4.10-pre11) and also > HartHat Linux CDK > > 1.2 version (kernel 2.2.14). Same problem in both the kernels. > > Well, both of those sources are very different. Are you running this > board in 'PReP' mode? Your own firmware or what? Anyhow, if > you're making > any calls back to the firmware later on, you must not mess w/ > the MSR value. > > -- > Tom Rini (TR1265) > http://gate.crashing.org/~trini/ > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
