Hi I'm using 8240 on a costume board with Monta Vista LSP. while booting after system has been mounted i am receiving an Kernel Panic. I'm not sure what parameters i need to pass to init. dose any body have an idea?
eth0: OEM i82557/i82558 10/100 Ethernet, 00:A0:F7:33:34:35, IRQ 18. Board assembly 000101-001, Physical connectors present: MII Primary interface chip i82555 PHY #1. Forcing 10Mbs half-duplex operation. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xd6a8ca49). NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 176.210.1.1, my address is 176.210.100.174 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Looking up port of RPC 100003/2 on 176.210.100.112 Looking up port of RPC 100005/2 on 176.210.100.112 VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 180k init 4k openfirmware Kernel panic: No init found. Try passing init= option to kernel. Rebooting in 180 seconds.. Ofer Rashuk-Rosenthal. Software team leader. RADLAN Computer Communication ltd. Atidim Technological Park, Blgd. 4 Tel-Aviv 61131, Israel Tel:+972-3-7657924 Fax:+972-3-6487368 mailto:oferr at radlan.com Web : Http://www.radlan.com ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
