Keith, On Wed, 2006-08-16 at 10:53 +0200, Keith Redfern wrote: > I am trying to dynamically link busybox with the correct libraries but > run into problems with directory paths and CC/LD flags. > > I am using the toolchain supplied with ELDK and my target board is > ppc_8xx based. The busybox version that I am using is 1.1.3. > <snip> > > Is this the correct place to make modifications? > > Has anyone already figured the changes required to get this to work > with ELDK toolchain? > > Any insight would be useful. > > > > ...?Keith
I have busybox 1.2 building under ELDK 4.0, and didn't mess at all with the Make system, and am building for a ppc_6xx- target. I realize this isn't quite your setup, but is pretty close. As long as you have the tools listed in your PATH (in my case /opt/tools/eldk4.0/usr/bin:/opt/tools/eldk4.0/bin), you should be able to build fine using 'make menuconfig'. Just go to 'Busybox Settings->Build Options' and select 'Do you want to build BusyBox with a Cross Compiler?', in your case entering 'ppc_8xx-' or whatever the prefix is for your CPU. regards, Ben
