So can u access your NFS mapped partition? If you can access every FILEs on the partition, running updatedb ought to index the NFS partition also. Then ?locate fixdep? is just to find the local indexed database and display the matched result --- I just don?t understand the problem. Please state more what have you done in order to let us help you.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:linuxppc-embedded-bounces+vows_siu=yahoo.com.hk at ozlabs.org] On Behalf Of Wade Maxfield Sent: Tuesday, August 22, 2006 5:34 AM To: ppc Subject: ML40X, ppc 405 crash I was running NFS on ML40X. I did a "updatedb" and then immediately, "locate fixdep" I got the following crash root at ml403:/home/moduletest# updatedb locate fixdep eth0: Could not transmit buffer. eth0: Could not transmit buffer. eth0: Could not transmit buffer. Oops: kernel access of bad area, sig: 11 [#1] PREEMPT NIP: C01D0F74 LR: C01D0910 SP: C28B1930 REGS: c28b1880 TRAP: 0300 Not tainted MSR: 00029030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 DAR: 00000004, DSISR: 00800000 TASK = c0b034c0[5097] 'frcode' THREAD: c28b0000 Last syscall: 234 GPR00: 00000000 C28B1930 C0B034C0 C35E3200 C03CC380 C276E810 000005E8 C3CE8880 GPR08: 00000002 00000000 C3CE890C 00000000 33003599 10018E04 100C3208 C02DCE08 GPR16: C00DB1CC C02DCE08 00000002 0000000A C28B1DF8 C02E0000 C02A0000 C3A30940 GPR24: 00000000 00000000 00000000 C3A30940 00000000 C35E3200 C3CE8880 C03A8800 NIP [c01d0f74] pfifo_fast_dequeue+0x40/0x74 LR [c01d0910] qdisc_restart+0x30/0x2b4 Call trace: [c01c1e94] dev_queue_xmit+0x264/0x318 [c01dd8dc] ip_finish_output+0x140/0x2cc [c01dddb0] ip_queue_xmit+0x348/0x53c [c01ef628] tcp_transmit_skb+0x324/0x7f8 [c01f05fc] tcp_write_xmit+0x14c/0x31c [c01ed360] __tcp_data_snd_check+0xc8/0xfc [c01ed9a4] tcp_rcv_established+0x2c0/0x8ac [c01f7250] tcp_v4_do_rcv+0x184/0x374 [c01f7d9c] tcp_v4_rcv+0x95c/0xa4c [c01da000] ip_local_deliver+0x120/0x298 [c01da86c] ip_rcv+0x400/0x508 [c01c2614] netif_receive_skb+0x24c/0x2fc [c01c276c] process_backlog+0xa8/0x1a0 [c01c2908] net_rx_action+0xa4/0x1cc [c001bef4] ___do_softirq+0x7c/0x114 Kernel panic - not syncing: Aiee, killing interrupt handler! <0>Rebooting in 180 seconds.. ------------------------------------------------------------------------ ------------------------------------------------------------------------ ----- Here is the kernel build and boot information. (I use the demo compact flash disk image shipped with the ml403 as an intermediate. I've not yet been able to get a small enough build to fit on 412 meg using your tools.) Linux version 2.6.10_mvl401-ml40x (HYPERLINK "mailto:root at localhost.localdomain"root at localhost.localdomain) (gcc version 3.4.3 (MontaV ista 3.4.3-25.0.107.0601076 2006-07-21)) #1 Fri Aug 18 14:43:45 CDT 2006 Xilinx ML40x Reference System (Virtex-4 FX) Port by MontaVista Software, Inc. (HYPERLINK "mailto:source at mvista.com"source at mvista.com) Built 1 zonelists Kernel command line: console=ttyS0,115200 ip=on root=/dev/xsysace2 rw Xilinx INTC #0 at 0xD1000FC0 mapped to 0xFDFFEFC0 PID hash table entries: 512 (order: 9, 8192 bytes) hr_time_init: arch_to_nsec = 6990506, nsec_to_arch = 1288490158 Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 61824k available (2244k kernel code, 640k data, 140k init, 0k highmem) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. desched cpu_callback 2/00000000 desched thread 0 started up. NET: Registered protocol family 16 Registering platform device 'xilinx_emac.0'. Parent at platform Registering platform device 'xilinx_fb.0'. Parent at platform Registering platform device 'xilinx_sysace.0'. Parent at platform Registering platform device 'xilinx_iic.0'. Parent at platform Registering platform device 'xilinx_gpio.0'. Parent at platform Registering platform device 'xilinx_gpio.1'. Parent at platform Registering platform device 'xilinx_gpio.2'. Parent at platform Registering platform device 'xilinx_ps2.0'. Parent at platform Registering platform device 'xilinx_ps2.1'. Parent at platform Installing knfsd (copyright (C) 1996 HYPERLINK "mailto:okir at monad.swb.de"okir at monad.swb.de). Console: switching to colour frame buffer device 80x30 xgpio #0 at 0x90000000 mapped to 0xC505C000 xgpio #1 at 0x90001000 mapped to 0xC505E000 xgpio #2 at 0x90002000 mapped to 0xC5060000 xilinx_ps2 #0 at 0xA9000000 mapped to 0xC5062000 xilinx_ps2 #1 at 0xA9001000 mapped to 0xC5064000 Serial: 8250/16550 driver $Revision: 1.90 $ 5 ports, IRQ sharing disabled Registering platform device 'serial8250'. Parent at platform ttyS0 at MMIO 0x0 (irq = 9) is a 16450 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) elevator: using anticipatory as default io scheduler System ACE at 0xCF000000 mapped to 0xC5066000, irq=3, 500472KB xsysace: xsysace1 xsysace2 PPP generic driver version 2.4.2 PPP Deflate Compression module registered NET: Registered protocol family 24 xemac 0: using fifo mode. eth0: Xilinx EMAC #0 at 0x60000000 mapped to 0xC5068000, irq=0 i2c /dev entries driver xilinx_iic.0 #0 at 0xA8000000 mapped to 0xC506E000, irq=6 mice: PS/2 mouse device common for all mice atkbd.c: keyboard reset failed on xilinxps2/serio0 atkbd.c: keyboard reset failed on xilinxps2/serio1 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 Sending DHCP requests ., OK IP-Config: Got DHCP answer from HYPERLINK "http://0.0.0.0"0.0.0.0, my address is HYPERLINK "http://172.17.6.49"172.17.6.49 IP-Config: Complete: device=eth0, addr=HYPERLINK "http://172.17.6.49"; 172.17.6.49, mask=HYPERLINK "http://255.255.254.0"255.255.254.0, gw=HYPERLINK "http://172.17.7.254"172.17.7.254, host=HYPERLINK "http://172.17.6.49"172.17.6.49, domain=HYPERLINK "http://precisiondrilling.com"; precisiondrilling.com, nis-domain=(none), bootserver=HYPERLINK "http://0.0.0.0"0.0.0.0, rootserver=HYPERLINK "http://0.0.0.0"0.0.0.0, rootpath= EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 140k init INIT: version 2.78 booting Activating swap... Checking all file systems... fsck 1.27 (8-Mar-2002) Calculating module dependencies... depmod: QM_MODULES: Function not implemented done. Loading modules: modprobe: QM_MODULES: Function not implemented Mounting local filesystems... nothing was mounted Cleaning: /etc/network/ifstate. Setting up IP spoofing protection: rp_filter. Disable TCP/IP Explicit Congestion Notification: done. Configuring network interfaces: done. Starting portmap daemon: portmap. Starting dhcpcd on eth0 Running ntpdate to synchronize clock. Cleaning: /tmp /var/lock /var/rundhcpcd[775]: dhcpConfig: ioctl SIOCADDRT: File exists . INIT: Entering runlevel: 3 Starting kernel log daemon: klogd. Starting system log daemon: syslogd. Hostname: ml403. Creating barrier for shutdown Starting X11 session for user 'linux' Welcome to the ML403 Evaluation Board (C) 2004 Xilinx, Inc - Systems Engineering Group -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 2006/8/21 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.405 / Virus Database: 268.11.4/424 - Release Date: 2006/8/21 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060822/1829d495/attachment.htm
