Hi,
I'm working on a project which will use hardware based on Analogue & Micro
Adder875 module together with Linux 2.4.
I use RedBoot as bootloader and kernel 2.4.27-pre1, both came with the Adder
module.
The project require:
- dual ethernet support with AM79C874 PHY
The driver I've found (fec.c) only supports one ethernet. I'v started
modifying a newer version of this driver which have support for my PHY.
I
have made some progress but it's not working yet. Found out that the
first
FEC is used to communicate with both PHY's. Both devices are detected
correctly and the first seems to work but the second hangs the kernel
when
the first packet is sent or received.
- SPI support
Have found a simple driver (cpm_spi.c), which I have not tested yet.
- PCMCIA support
Will try to modify the m8xx_pcmcia driver.
Not required but would be good to have:
- USB host support
Have no clue where to start looking.
Have anyone used this module together with Linux and are there working drivers
for it? Any tips/ideas?
Thanks
/Markus
------------------
Markus Westergren
Biologigrand 17
S-907 32 Umea
SWEDEN
