All, Please cancel this request, I found the problem. I had a switch (SW4) with the wrong setup.
Thanks - Jose Jose Almeida wrote: > All, > > I'm trying to get a linux 2.6 kernel up and running on an freescale > 8560 ADS board. I have every peace of this up and running apart from > the FCC ethernet. > > I've switched to the legacy mode, which now allow me to talk to the > PHY and negocite properly @ 100BT FD. > > But I don't seem to get any ethernet packet going out. The FCC > controller does not seem to read the BDs, and all the packet's I'm > placing in the BD just stay there for ever ! > > I'm wondering if you have a driver which works properlly ? I'm > thinking on some wrong setup in the ioports, but is all seems to be > correct ! > > I'm using a 2.6.9 kernel, but I also tryed other versions (2.6.11r4), > with the same problems ... > > Thanks > Jose > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > >
