Finn S. Nielsen wrote: > Hi Jakob, > > I noticed on the embedded powerpc mailing list, that you are working w. linux > on the Memec V2P20 FF1152 board. > I have one too and I'm given the task to get a linux up and running on it... > > What kernel version are you using and where did you get the source ?. > It seems to me that in the official source tree, there is only support > for the Xilinx ML300 board - or am I missing something?
If you are speaking about 2.6 then you aren't missing anything. > Montavista and MIND systems say they have a port for the memec board, but if > an open MontaVista's code for memec is in linuxppc-2.4 tree. http://ppc.bkbits.net:8080/linuxppc-2.4/cset at 1.1282 We've used 2VP7-FG456 board with the P160 COMM module. Best rewgards, Andrei > source port exists, I'd prefer that. > > Best regards, > > Finn S. Nielsen > IO Technologies a/s > Carl Jacobsens Vej 16, opg. 6, 3 sal > 2500 Valby > Denmark > Tlp (direct): +45 36188109 > Fax:. +45 36188101 > Check out our new website: http://www.iotech.dk > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
