[DBG SRC] Re: DMA Problem

[Roger Larsson]

On Wednesday 20 April 2005 19.37, Sanjay Bajaj wrote:
> I am having a setup issue with the DMA channel 0 with the DMA Controller
> on PPC440GX. The code I wrote is:
>
> #if defined(CONFIG_PPC4xx_DMA)
>     /* Setup the DMA */
>     DPRINTK("PPC4xx pwidth: %d\n", ppc4xx_get_peripheral_width(DMA_CH0));
>     ppc4xx_set_dma_mode(DMA_CH0, DMA_MODE_READ);
>     ppc4xx_set_src_addr(DMA_CH0, (phys_addr_t)(pdev->x2mem_phys_addr +
> src_addr));
>     ppc4xx_set_dst_addr(DMA_CH0, (phys_addr_t)dst_addr);
>     ppc4xx_set_dma_count(DMA_CH0, count);
>     ppc4xx_enable_dma(DMA_CH0);
>     DPRINTK("PPC4xx DMA Status: %d\n", ppc4xx_get_dma_status());
> #endif
>
> The DMA never completes and leaves a residue of 'count'. What am I missing?
>

Request irq and dma?

        if ((ret = request_irq(dma_irq, dma_irq_handler, SA_SHIRQ, "NAME")))
                - - -
        /* reserve a DMA channel */
        if (DBG_DMA(request_dma(DMA_CH0, const char *device_id))

BTW you should check return values, try this:

int fgrabber_report_dma_error(const char *call, int ret)
{
    switch (ret)
    {
        case DMA_STATUS_GOOD:
//          printk(KERN_DEBUG "dma: %s STATUS_GOOD\n", call);
            break;
        case DMA_STATUS_BAD_CHANNEL:
            printk(KERN_DEBUG "dma: %s STATUS_BAD_CHANNEL\n", call);
            break;
        case DMA_STATUS_BAD_HANDLE:
            printk(KERN_DEBUG "dma: %s STATUS_BAD_HANDLE", call);
            break;
        case DMA_STATUS_BAD_MODE:
            printk(KERN_DEBUG "dma: %s STATUS_BAD_MODE", call);
            break;
        case DMA_STATUS_NULL_POINTER:
            printk(KERN_DEBUG "dma: %s STATUS_NULL_POINTER", call);
            break;
        case DMA_STATUS_OUT_OF_MEMORY:
            printk(KERN_DEBUG "dma: %s STATUS_OUT_OF_MEMORY", call);
            break;
        case DMA_STATUS_SGL_LIST_EMPTY:
            printk(KERN_DEBUG "dma: %s STATUS_SGL_LIST_EMPTY", call);
            break;
        case DMA_STATUS_GENERAL_ERROR:
            printk(KERN_DEBUG "dma: %s STATUS_GENERAL_ERROR", call);
            break;
        case DMA_STATUS_CHANNEL_NOTFREE:   
            printk(KERN_DEBUG "dma: %s STATUS_CHANNEL_NOTFREE", call);
            break;
        default:
            printk(KERN_DEBUG "dma: %s STATUS(0x%x)", call, ret);
            break;
     }

    return ret;
}

#ifdef DEBUG_DMA
#define DBG_DMA(call) fgrabber_report_dma_error(#call, call)
#else
#define DBG_DMA(call) call
#endif

/RogerL