Hi, I've built and installed U-Boot 1.1.2 on an IBM 440GX eval board (ocotea). After powering the board I can get the uboot interactive prompt. If I type 'reset' or hit the reset button it hangs. I get the same results whether or not I use the BDI2000. Doing a power cycle of the board is the only way to get back to the prompt.
Is there some reconfiguation U-Boot does that causes the processor boot address to change after the initial power-up? Am I missing something here? Thanks, Marc W. Howard -------------- next part -------------- An HTML attachment was scrubbed... URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20041111/65e46a80/attachment.htm
