I am a novice in the embedded PPC world, I have been hearing a lot about PRep,CHRP, OF booting, ppcBoot etc etc..on the net. I need to port a part of linux code to PPC and get it work in a sandpoint board. Can any of u brief me about whats what ? The big picture of whats goin on ? A bit of DINK and memory layout when the kernel is loaded would also be of great help. Any pointers to how linux boots on the PPC would also be of great help. Just the philosophy would do..( without referring source files). Whats the "ppcBoot" project is about ?
Sarnath *********************************************************************** Disclaimer: This document is intended for transmission to the named recipient only. If you are not that person, you should note that legal rights reside in this document and you are not authorized to access, read, disclose, copy, use or otherwise deal with it and any such actions are prohibited and may be unlawful. The views expressed in this document are not necessarily those of HCL Technologies Ltd. Notice is hereby given that no representation, contract or other binding obligation shall be created by this e-mail, which must be interpreted accordingly. Any representations, contractual rights or obligations shall be separately communicated in writing and signed in the original by a duly authorized officer of the relevant company. *********************************************************************** ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
