In message <Pine.SGI.3.95.1000705121641.27740C-100000 at world.std.com> you wrote: > > Thanks, Wolfgang, for your response. It helped somewhat. Here's what I > discovered: > > 1. I am also unable to run ash.static
Then shread libs are not your primary problem. > 2. I forgot to mention another error message (actually, I thought it was > trivial but it's not), I also get a "Warning: unable to open an initial > console" error message. OK - that's a different issue, then. > In /etc/exports, I export the volume as /opt/hardhat..... > > However, when I do an "exportfs -av" the exported volume shows up as > /usr/opt/hardhat..... > I specified /opt/hardhat... in /etc/dhcpd.conf > > I think, therefore, that NFS is not allowing access to the proper > directories, and that's why it can't find an init (or a /dev/console!) > > Am I on the right track? I think so - most probably your target can't see the files it needs. You should be able find out by running some network analyzer (tcpdump might be enough for the job; ethereal will make it more convenient). The quick test is to fix your configuration and try it out :-) Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de If it went on at this rate, in several billion years he'd be rich beyond his wildest dreams! - Terry Pratchett, _Soul Music_ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
